FloPlast Air Admittance Valve 32/40/50mm AF32
FloPlast Air Admittance Valve 32/40/50mm AF32 with Free Standard Delivery in the UK
The FloPlast Air Admittance Valves are designed to allow the free entry of air into the sanitary pipework system without the escape of foul gasses into the building.
When installed into sanitary pipework systems conforming to BS EN 12056:2000, the FloPlast Air Admittance Valve not only prevents the loss of water from trap seals due to induced siphonage but also has the added advantage of providing an early warning indicator to a potential drainage blockage. The AF110 Push-Fit Air Admittance Valve may also be used as a secondary rodding point to remove such blockages.
All Valves should be stored in an upright position.
Approved Document H of the Building Regulations only permits Air Admittance Valves that conform to BS EN 12380.
Internal Air Admittance Valves
It is recommended that air admittance valves are not used externally, as environmental debris will affect the air tightness performance of the valve.
AF32 - 32mm, 40mm and 50mm Air Admittance Valves are produced from white ABS/PVC, and are designed for use with waste pipe conforming to British/European standards connected by a solvent cemented pipe adaptor supplied with the product.
Ventilation and access must be provided to all Air Admittance Valve installations.
This Air Admittance valve is suitable for the following pipe sizes: